row2k Features
Rowing Technique: Visualisation of Catch Factor and Blade Slip
January 22, 2024
Valery Kleshnev,

Q: Carlo Zezza - a rowing writer and masters rower from Cambridge Boat Club, USA, asked us interesting questions: "To visualize a catch factor of -15 ms, would it be useful to estimate how far the seat moves toward the bow before the handle?"

A: During the optimal Catch Factor, seat moves to the now no more than 1.5cm. Only negative values of the Catch Factor below -50ms cause "slide shooting" more than 5cm, significant loss of legs power and a problem for other crew members. The seat movement at catch vary in different rowers and at various stroke rates, so there is no singular relationship between seat displacement and its timing after catch. This Newsletter presents three extreme examples with various values of Catch Factor and legs speed.

During the target time of Catch Factor for sculling -15ms, the seat travels from 0.5cm in the Sculler 1 up to 1.0cm in the Sculler 3. At the target CF = -25ms for sweep, the range of the seat movement is 0.8 - 1.5 cm. These values were mentioned earlier in our publications as "quite small". However, the seat velocity quickly increases after catch, so more negative values of CF cause much longer seat displacement during its time:

  • CF = - 50ms can be related to the seat movement from 2 to 4cm depending on the rowing technique and stroke rate.
  • CF = -80ms causes "slide shootings" from 4 to 8 cm, which is quite significant.

Clean catch with equal front and back splash
Clean catch with equal front and back splash

Q: Another question from Carlo Zezza was: "How deep do the best rowers plant the blade before the handle changes direction?"

A: In fact, when the blade changes direction at catch (its velocity relative to the boat becomes zero), it still moves forward relative to the water with the boat velocity at this moment. If the blade is "planted" into the water at this time, it would hit water with its back face producing a backsplash and braking force. The blade must be accelerated backwards up to certain velocity to hit the water with its front or achieve a neutral entry.

This Newsletter presents calculations and some reference values: the blade velocity relative water becomes positive after about 65ms after the catch and the handle travels only about 3cm or 2deg during this time. After it, the bottom of the blade can touch the water without backsplash.

Then, it takes another 60-70ms or 6cm= 4deg of the oar movement to bury the blade completely under the water (at target value 6deg of Catch Slip).

The directions to minimise the Catch Slip and avoid backsplash:

  1. Faster angular oar velocity and acceleration.
  2. Longer outboard.
  3. Lower the boat velocity at catch - another point in favour of the "boat check".
  4. Longer catch angle: e.g. 10deg longer catch angle is about 26% more effective.

Catch with front splash
Catch with front splash

Catch with back splash
Catch with back splash

Clean catch
Clean catch

This is a short version of this Newsletter. Full text is available for BioRow members:

If you enjoy and rely on row2k, we need your help to be able to keep doing all this. Though row2k sometimes looks like a big, outside-funded operation, it mainly runs on enthusiasm and grit. Help us keep it coming, thank you! Learn more.


Log in to comment
There are no Comments yet

Rowing Features
Rowing Headlines
Get our Newsletter!

Support row2k!

Tremendous thanks to our
row2k supporters!

Get Social with row2k!
Like row2k on Facebook Follow row2k on Twitter Follow row2k on Instagram Follow row2k on Youtube Connect with row2k on LinkedIn

Get the row2k app!

row2k rowing store!

Get our Newsletter!
Enter your email address to receive our weekly newsletter.

Support row2k!

Advertiser Index
Advertise on row2k