row2k Features
Technique Feature: How to Achieve Light Catches
November 16, 2022
Charlotte Hollings, Calm Waters Rowing

The Women's 8 with Romania in the foreground, 2022 World Championships

One aspect of the stroke that is central to boat speed and yet counter-intuitive to so many is light catches. As I get older and sadly lose power, I rely more and more on my ability to row efficiently, particularly in trying to minimize any negative effect I have on the boat. Light catches are critical towards this effort; and yet as we try to row with more power we inevitably check the boat more, so how can we reduce this checking of speed in order to maximize our average speed?

The hull slows down as we approach the catch because we are stopping our mass moving towards the stern by putting pressure on the foot stretchers. This will start to happen at the moment the Achilles tendon becomes fully extended and the heels start to lift off the foot boards. Pressure is starting to build on the toes against the foot stretchers. This force is in the opposite direction of travel and will slow the boat (every action has an equal and opposite reaction).

We therefore need to be more aware of how to reduce this pressure on the foot stretcher while getting the blade into the water and then getting pressure on the oarlock, hence on the pin. Pressure on the pin moves the boat forward. Pressure on the foot stretchers before pressure on the pin will create check and slow the boat. As a rower becomes better, the goal at the catch is to reduce the check. It is impossible to eliminate it.

Irish Lightweight Men's Double at the 2022 World Championships
Irish Lightweight Men's Double at the 2022 World Championships

To illustrate check, I like to do a simple demo at the dock. I sit at the finish in my single with the stern 6 inches or so from the dock. As I move to the stern, the boat moves underneath me away from the dock. However, if I then move back towards the bow without putting my blades in the water, the boat moves back towards the dock.

Obviously we want to reduce this backwards movement as much as possible, but how? Simply, the blade has to be in the water before too much pressure is put on the foot stretcher. If you watch the best rowers, the blade takes almost no time to get buried at the catch and the body and legs have made little to no movement during that time.

Think about the catch as the last part of the recovery. In reality it is both the last part of the recovery and the first part of the drive, but most people tend to focus too heavily on the drive. When the bottom edge of the blade first enters the water, it should still be traveling to the bow. As soon as it touches the water, it should change direction, beginning the drive while continuing to get the blade fully into the water.

The hatchet blade is ideally suited to picking off the catch. It doesn't take much lift of the handle to get part of the blade covered and therefore get some pressure on the face of the blade, which will allow us to get pressure on the pin. The hard part is how to do this without putting a lot of weight on the foot stretchers first

Remember that during the recovery you are moving your mass in the opposite direction of the boat allowing it to go faster. Then you have to stop your mass and start back in the other direction. It gets even more complicated because before you get any weight on the oar, the blade face needs to be moving faster than the boat is already moving.

An analogy is to look at it from the perspective of your body in a standing position. If you slowly squat down and then slowly come back up, you will feel some weight on the soles of your feet. If you drop down more quickly and try to accelerate back up, you will feel a lot more weight. The same thing happens along the horizontal plane in the boat. As the stroke rate comes up, you are moving faster and putting a lot more pressure on the foot boards.

For that reason, we don't talk about kicking or slamming the legs down. Too often we are focused on the legs instead of making sure that we have something for the legs to drive against. Without the blade in the water, the boat will literally move backwards as we put pressure on the foot plates. We need to anchor the blade in the water to counter balance the pressure on the foot stretcher.

To try to alleviate this pressure as we approach the catch, we talk about floating into the stern, or tip-toeing into the stern, or sneaking up on the catch, and then anchoring the blade. I try to get the blade in the water without, so to speak, the boat knowing I got it in. How little can I negatively affect the boat at the catch? Another tip is to try not to think of yourself as moving to the stern but rather allowing the hull to come to you. We are simply getting our feet out of the way, allowing the boat to flow forward.

Emma Twigg, Women's Single at the 2022 2022 World Championships
Emma Twigg, Women's Single at the 2022 2022 World Championships

We use two drills to focus on making the catch as light as possible and making the catch separate from the drive.

The first is to simply get in the habit of starting at the catch whenever the boat is at a dead stop. As you start moving your mass to bow, you should immediately feel resistance on the face of the blade as well as pressure on the soles of your feet against the foot stretchers. There should be no jarring or jerking of the boat. You then want to try to replicate this feeling every drive as you start rowing continuously.

The second drill is a finish to catch drill. It is exactly as it sounds. A stationary drill, you sit at the finish and then move to the catch, stopping immediately after the blade is set in the water. There should be no drive, no motion of the legs or body towards bow, minimal pressure on the foot plates. The catch here literally becomes the end of the recovery.

Think body, slide, catch and move the blade to the water as you come up the last inch of the slide. Repeat this drill a few times and then when you move to continuous rowing, try to keep the catch just as light with no emphasis on the drive until after the blade is set. It should almost feel as if you're pausing after the catch and before the drive.

As part of the drill, you might even want to let the blade float through the first few inches of the drive before engaging the legs. The goal of the drill is to make a break between the catch and the drive knowing that as we go faster and harder, this break will get smaller and smaller but always trying to keep light on the foot stretchers until you feel weight on the oar. Then it is okay to accelerate your mass, trying to put as much force on the oar for as long as possible.

It will take a lot of practice but when you get it, you'll gain more speed with less effort.

This video of the Men's 1x at the World Championships is a great example of light catches. I especially like Ollie Ziedler, the 2019 and 2022 World Champion. So much power and yet such a light, almost delicate catch.

If you enjoy and rely on row2k, we need your help to be able to keep doing all this. Though row2k sometimes looks like a big, outside-funded operation, it mainly runs on enthusiasm and grit. Help us keep it coming, thank you! Learn more.


Log in to comment
11/16/2022  3:23:00 PM
Excellent commentary on the art of making the front turn. Just remember that "One can never really row. I mean, one can never become a perfect example of an oarsman; one can only illustrate in a boat what one thinks rowing is." -- Steve Fairbairn

Rowing Features
Rowing Headlines
Get our Newsletter!

Support row2k!

Tremendous thanks to our
row2k supporters!

Get Social with row2k!
Like row2k on Facebook Follow row2k on Twitter Follow row2k on Instagram Follow row2k on Youtube Connect with row2k on LinkedIn

Get the row2k app!

row2k rowing store!

Get our Newsletter!
Enter your email address to receive our weekly newsletter.

Support row2k!

Advertiser Index
Advertise on row2k