Welcome, Guest!     Log In  Sign up!
row2k


Support row2k!
Advertiser Index

Rower Tricks: The Check-Checking Tube
posted on September 19, 2012

click for full-size image!
This hack spotted in action on the Charles, bound for the 2011 Worlds
click images for full-size version

Want to know if all those miles and drills have taken the stern check out of your boat? If you row a single or double, then you might want to try this simple hack that they've been using on the Charles, and likely all over, for years: the Check-Checking Tube.

This is another great little trick that--for years--did the job that some pricey electronics now try to tackle: telling you if your boat run is constant, or if you need to work on a smoother pick-up around the front end.

We checked in with a hacker who learned this one way back for a quick hacker how-to on this one:

We would attach a length of copper tubing to the stern of a single, double pair, or a straight four. It works best when the stroke seat can see easily see it, so it's not so great on a stern coxed boat.

Bend the tube so that it follows the line of the stern. As you row, water is forced through the tube, and creates a fountain off the stern. The idea is to keep the height of the water shooting out of the tube as constant as possible. As the boat slows down and checks at the catch, the height of the water will drop drastically.

The Check-Checking Tube is pretty easy to install--yet another boathouse-centric use for electrical tape-- and a great training tool. We hear that it creates some drag, so it's probably not a good idea to race with it (which might explain why we don't see it on every single at the Head of the Charles on race day--yet!).

The copper tubing bit definitely makes this an old-school hack, and we've seen more modern versions that get away with plastic tubing and a really robust straw might even do the trick on a single. The trick is to catch the water coming down past the hull, direct it upwards, and see if your speed is constant enough to keep the "fountain" steady.

Pretty slick, eh? Maybe the best part--aside from being another great use for a straw--is that it provides constant feedback, with no batteries and no coaching required.

Have another neat way to coach yourself on the water? Share your tips--and hacks--in the comments below.

This hack was 100% reader-submitted. If you have a great rowing hack for a future column, please send it to us!

Comments

Log in to comment
Rowperfect
09/19/2012  9:39:04 AM
I'm from UK and instead of copper we use a plastic tube. Best one is from a pub - the sort that pumps beer to the tap from a barrel. Cheaper and easier to Position than copper. Rebecca Caroe, ROWPERFECT



row2k author
row2k hackers
A rotating cast of characters full of boathouse secrets.

More Columns
Rower Tricks: Trailer Oar Organizer
(April 8, 2014)

Training Hack: Cement Can Weights
(March 25, 2014)

Coach Tricks: The Team Wrench Box
(March 12, 2014)

Rigger Tricks: The Boatman's Buddy
(February 23, 2014)

Tool Hack: Nail-Polished Wrenches
(February 4, 2014)

More Rowing News
Stanford: Charles in Charge
(April 21, 2014)

Wisconsin finishes strong at Clemson Invite
(April 21, 2014)

Gonzaga: Bulldogs Gain Valuable Great Experience At Clemson Invitaitonal
(April 21, 2014)

Michigan State: Rowers Produce Strong Performances at Stacked Clemson Invite
(April 21, 2014)

IU's 2V8 Leads the Way in Final Day of Clemson Invite
(April 21, 2014)

WSU: Rowing Collects Three Wins in Sunday Sessions
(April 21, 2014)

Write row2k | row2k Home | Copyright © 1997-2014 row2k media. All Rights Reserved. | Privacy Policy